#METAL SLUG EMULATOR SETUP IN RETROPIE INSTALL#
#METAL SLUG EMULATOR SETUP IN RETROPIE DOWNLOAD#

Step 3 : Deciding on Button Usage for Each Game Platform Through them, I can add more roms to the SD card and plug in two additional Xbox controllers for some sweet 4 player arcade gaming. I made a discrete hole on the lower side of the control panel and installed the USB ports there. When you close the cabinet you won't be able to access it easily. When the Arcade is finished you will end up using only one of the USB port of the PI.

This thing is totally optional, you donвЂ™t need to make it if you don't want to. I will briefly tell you what was this about as I have not seen anyone else use it. The rest of the hardware should be familiar to you all: Raspberry Pi 3, Power supply, SD Card, Monitor, Speakers and one peculiarity: USB Dual Extension cable ( ) The only difference is that I contacted the seller and specifically asked for these button colors: 2x Yellow, 2x Blue, 2x Red, 2x Green, 2x White, 8x Black, 2x White Player start buttons, 2 x Balltop joysticks (Red) The controller set I ended up buying included pretty much most of what I needed:

It would be easier to communicate the button functions to new players in a manual.

Most people would immediately associate the button position and function as this scheme is a classic on its own.

I wanted the mapping to be intuitive and easy to understand so I specifically decided to order buttons colored in the Super Nintendo color scheme. I see on the internet that a lot of people are using randomly colored buttons, which I find very impractical.

#METAL SLUG EMULATOR SETUP IN RETROPIE INSTALL#

(You can find other button layouts available here: )Д«efore actually buying the buttons I put a lot of thought about what color buttons I want to install on the arcade. Now that I knew I need a 20 button set I started looking for a good button layout which I can use and I picked this one: I didnвЂ™t want to complicate things further. This would require additional programming work so I decided to rely on the default settings as much as I can. I have also seen some people doing additional customization to their arcades by adding special buttons for starting and exiting a game. To be able to map all of the buttons properly I needed 2 more buttons for each player. This would have been sufficient enough for all game platforms I planned to use except for Playstation. The RetroPie based arcades I have seen rarely use more than 6 action buttons per player + 2 for start and select (8 in total for each player). Out of all emulators available inside RetroPie, I chose the following 8: Step 1 : Button LayoutД«efore ordering all of the hardware I had to take a decision which platforms I would use on the arcade cabinet, how many buttons I would need and how would I arrange them. Try to delve more into the official wiki pages as they are surely more informal. Mainly when it comes to an individual per ROMS control configurations or specific ROMS versions chosen.

I want you to keep in mind that even if you have the same button panel and you decide to follow me step by step and use exactly the same set of emulators I picked up, there is no guarantee that everything will work straight away.

#METAL SLUG EMULATOR SETUP IN RETROPIE DOWNLOAD#

If you want to download all of the files shared on this post, just go straight to the end of it and you will find a list. I hope it will be of use to people which plan to build an arcade with a different button scheme and can not simply copy the preconfigured files. I will also share with you the template document which I made to keep track on the button positions, while I was configuring the controls for the different platforms. In the beginning, I will talk a bit about some hardware and design choices I had to take before I even started thinking about configurations. My intention is to describe exactly how I configured my own arcade and share with you some preconfigured files which will allow you to replicate the design I used.

Maybe what I have to share will be of benefit to some people. Step 7.2 : System Specific ConfigurationД«ecause button configuration is still a rather complicated topic for many new coming enthusiasts, I decided to share my own experience in a specially dedicated post rather than repeating myself in different places on the forum.Step 7.1 : Global Settings Configuration.Step 3: Deciding on Button Usage for Each Game Platform.Guide: Setting Up a RetroPie controls using IPAC2 Controller Extensive Tutorial + Preconfigured files.

Metal slug emulator setup in retropie